The Arduino Starter Kit 01
GET TO KNOW YOUR TOOLS YOU'LL MAKE A SIMPLE CIRCUIT WITH SOME SWITCHES, AN LED, AND A RESISTOR
Discover: basic electrical theory how a breadboard works, components in series and parallel
Time 30 MINUTES
Level •
Electricity is a type of energy, much like heat, gravity, or light. Electrical energy flows through conductors, like wire. You can convert electrical energy into other forms of energy to do something interesting, like turn on a light or make some noise out of a speaker.
The components you might use to do this, like speakers or light bulbs, are electrical transducers. Transducers change other types of energy into electrical energy and vice versa. Things that convert other forms of energy into electrical energy are often called sensors, and things that convert electrical energy into other forms of energy are sometimes called actuators. You will be building circuits to move electricity through different components. Circuits are closed loops of wire with a power source (like a battery) and something to do something useful with the energy, called a load.
In a circuit, electricity flows from a point of higher potential energy (usually referred to as power or +) to a point of lower potential energy. Ground (often represented with a - or GND) is generally the point of least potential energy in a circuit. In the circuits you are building, electricity only flows in one direction. This type of circuit is called direct current, or DC. In alternating current (AC) circuits electricity changes its direction 50 or 60 times a second (depending on where you live). This is the type of electricity that comes from a wall socket.
There are a few terms you should be familiar with when working with electrical circuits. Current (measured in amperes, or amps; with the A symbol) is the amount of electrical charge flowing past a specific point in your circuit. Voltage (measured in volts; with the V symbol) is the difference in energy between one point in a circuit and another. And finally, resistance (measured in ohms; with the symbol is how much a component resists the flow of electrical energy.